We have gained vast expertise in offering Pneumatic Actuator with a wide range to our clients, which can be obtained from us at economical prices. We offer these pneumatic actuators to our clients that are used to convert energize into motion. We can customize this range to suit the diverse requirements of our esteemed clients. These are well known for its features like durability, high performance and easy to operate
Product Details:
Minimum Order Quantity | 1 Piece |
Actuator Type | Pneumatic Actuator |
Brand | Rotex |
Voltage | 115 V AC |
Model | SS 304 |
Material | Rotex Automation Limited |
Type | SS 304 |
Color | Dismounting Even Without Affecting Valve Functional Position |
Retracted Length | 16-3/4" |
Double Acting Pneumatic Actuator
Salient Features :
Double Rack & Pinion construction.
Maximum Working Pressure8 bar.
Life more than 1 million cycles.
Hard anodized body providing high corrosion resistance.
Additional lubrication is not necessary.
Anti blow-out pinion.
Pinion supported on large area of polyacetal bearings.
Temperature range :NBR-20 °C to + 80 °C PE -40 °Cto + 110 °C
Can be converted to single acting by Just adding springs.
End Stroke (0°)
Ideal for setting the closed position of the Butterfly Valve.
Set the closing position against the pinion.
10° over travel setting possible for closing.
Strong machined cam for locking.
5° under traveling can be adjusted.
End Strok (90°)
Setting the perfect opening and closing of the Ball Valve, will ensure a long life of the Ball Valve seats.
Extremely important for Pipe line pigging application.
+10° over travel setting possible for opening.
5° under traveling can be adjusted.
Anti Blowout
Integral strong Aluminium key provides firm locking of the opinion, thus eliminating move men under pressure
Acts like internal bearing to avoid interference of rack and pinion
Additional Information:
Product Details:
Brand | Rotex Automation |
Rotation angle | 25/35/45/65/95 |
Initial torque | 0.045 to 200 Ncm |
Nominal voltage | 24V DC / 2014V DC |
Coil terminal | Flying leads 20 cm |
Duty cycle | Up to 100% |
Salient Features :
Backlash Free Operation Between Rack & Pinion Makes Rotex Actuators Suitable For regulation Duty Coupled Along With Positioned (pneumatic Or Electro-Pneumatic).
Long Life Of The Actuator Seals, The Non Wearing Characteristic Of Mechanical Parts ensure That The Control Action Is Mentioned Over The Life Time Of The Actuator.
Can Be Coupled Along With Various Types Of Valves (ball, V Port Ball Or Plug,segment Ball, Butterfly, Plug) Or Louvers & Dampers For Variety Of Applications.
Typical Control Schemes Along With The Regulating Actuator Includes Provision For:
Air Failure Safety Includes Stay Put Or Fail Safe Operation Like Full Close Or Full Open.
Power Failure Safety Including Stay Put Or Fail Safe Operation Like Close Full Open.
Both Air & Power Failure Safety Including Above.
Additional Information:
Product Details:
Valve Motion | Rotary Motion Valve |
Brand | Rotex |
Usage | Dismounting Even Without Affecting Valve Functional Position |
Rotation | 180 Degree |
Torque | 0.5 Nm to 2500 Nm |
Type | ECF, CSF and SSF |
180 Degree Rotary Actuator
Features:
Ideal for line size above 50 nb.
Compact and light construction.
Tight shut off available for longer seat life, with the end stroke adjustment of the actuator.
Double acting / single acting features:
Suitable typically for 3 way valve requiring on-off operation.
Available in both single acting (spring return) or double acting versions.
Single acting 180° actuator can provide centre off for 3 way ball valve,
bottom entry by choosing the option of 3 position.
Can be converted to 3 position 0- 90° -180° actuator for 3 way valves usingrotex limit switch & namur valve type 30138.
End stop adjustment provided for opening & closing direction as a standard
Actuator mounting is as per iso 5211 and accessories to namur .
180° actuator has 50% of torque value, of that of 90° actuator.
Additional Information:
Product Details:
Brand | Rotex Automation |
Temperature range | NBR-20 degree C to+80 degreeC For PE-40 degree C to110 degree C |
Life Span | more than 1 million cycles |
Actuator Type | Pneumatic Actuator |
Valve Motion | Rotary Motion Valve |
Pressure | Maximum working pressure 8 bar |
A New Generation, Compact Extruded, Aluminium Hard Anodized Body Double Rack And Pinion Actuator Series "ECF"
Salient Features :
Unique Spring Retainer Construction.
Pre compression leads to longer spring life.
Easy assembling & dismantling of various combination of spring sets.
Modular spring construction permits combination of springs to generate optimum torque.
Eliminates need for special tools & keys.
No lubrication required for springs.
Safe handling & dismantling.
Large Bearings :
Large bearing area to reduce load
High tech polymer for low friction
Triple point bearings one on top of rack, second on piston OD, third by piston key rolling on pinion.
Iso Pad :
Valve mounting as per ISO 5211 with an additional one higher size pad.
Standardization of mounting accessories
ISO Centering ring for precise location..
Octagonal drive shaft for ease of mounting.
Spring :
Gr. III epoxy coated springs having high corrosion resistance.
Modular springs set catering to various valve torque characteristics.
Non buckling modular spring design.
Additional Information:
Product Details:
Brand | Rotex |
Voltage | 115 V AC |
Pressure | Maximum working pressure 8 bar |
Rated Load | 100 lb |
Valve Motion | Rotary Motion Valve |
Temperature range | NBR-20 degree C to+80 degreeC For PE-40 degree C to110 degree C |
Life Span | More than 1 million cycles |
Stainless Steel Actuator :
Features:
Double rack and pinion construction.
CF8M material for high corrosion resistance.
The pinion and piston are supported on polyacetal bearings
Maximum working pressure 8 bar
Additional lubrication is not required
Temperature range :For NBR-20°Cto+80°C For PE-40°Cto110°C
Life more than 1 million cycles
Anti blow-out pinion
Unique spring retainer construction
Convertible to single acting just by adding springs
CF8m Body, Cover:
High grade casting.
Body bore homed for smooth finish and long life of seals.
No crevices for easy cleaning , avoiding bacterial growth.
Internals :
All internals are direct replacement to ECF.
All the seals are common for ECF, SSF.
Springs & Spring rating are as per the ECF.
Piston With Rack :
Double rack and pinion construction.
Hard anodized pistons.
CF8M piston on request.
NBR as standard and PE on request.
Product Details:
Minimum Order Quantity | 1 Piece |
Rated Load | 100 lb |
Stroke Length | 2" |
Speed at Rated Load | 8.4 in/min |
Duty Cycle | 17% |
Retracted Length | 17" |
Brand | Rotex |
Voltage | 115 V AC |
Material | SS |
Rotation | 90 degree or 180 degree |
3 position rotary actuator spring return controlled by limit switch
Features:
The actuator is suitable for coarse - fine adjustment, typically for batchnig operations or processes.
The actuator has to be spring return
The operation sequences fixed from full open, partial open to full close.
Infinite intermediate positions are possible with the limit switch.
It can be fine tuned to the application easily
The settings can be changed at site with ease, by simply adjusting the third cam provided.
It is applicable for 90° or 180°
Any Rotex spring return actuator can be converted into this arrangement by adding Rotex limit switch along with Rotex NAMUR valve type 30138.
The accuracy and repeatability depends upon the air pressure variation, change in the torque of ball valve, change in density and the pressure of media, etc.
Additional Information:
Product Details:
Brand | Rotex Automation |
Rotation angle | 25/35/45/65/95 |
Initial torque | 0.045 to 200 Ncm |
Nominal voltage | 24V DC / 2014V DC |
Coil terminal | Flying leads 20 cm |
Duty cycle | Up to 100% |
Features:
The actuator is suitable for coarse -fine adjustment typically
for batch in go preparation processes.
The repeatability is 100% since stopping is by mechanical stoppers.
It is suitable for application calling for precise fine coarse adjustment
like liquid filling system.
The actuator can be switched to one position from any position very
easily with the solenoid control.
The 3rd position is achieved by theme chanical stopping of the
piston movement in the return stroke by pneumatic stopper pistons.
The Intermediate position is present at 20% opening. The opening
can be adjusted as required by the set screw. This is field adjustable.
The actuator as standard works in reverse action as opposed
to conventional configuration i.e. piston inward stroke opens the
valve & piston outward stroke closes the valve.
The end stops (+/- 10°) are provided on the closing & opening side
of the actuators for setting valve closing precisely.
The springs can be provided to bring actuator to mid position
as a standard(optional attachment).
Product Details:
Brand/Make | Rotex |
Pressure | 0.5mpa |
Operating Temperature | 0.60 deg C |
Set Pressure | 0.05-0.85 Mpa |
Filtration Grade | Medium Filter |
Drain type | Manual |
Air Preparation System - L Series Lubricator R
Features :
Compact Size, Light Weight, Good Performance, Easy Use, Charming Appearance.
The Lubricator Utilizes The Novel Drops Control Mechanism To Fulfill The Oil Adding With Air On. The Inside Flow Sensor Ensures The Low atomizing Flow, Thin Oil Mist Particles And Long Transmission Distance.
On Line Lubrication.
Precise Setting Of Lubrication.
Bowl Can Be Refilled On Line By Opening Refill Screw Completely
Refill Screw Can Be Opened Partially As Shown And Then The Complete Bowl Can Be Removed To Refill.
Fine Filter To Avoid Chocking Of Lubrication Path.
High Quality Of Flow Rates Are Maintained Due To Filtrations.
Specially Profiled Screw Ensures The Fine Controls.
Consistency In Oil Flow Is Maintained By Low Pressure Nonreturnable Valve.
Caution Note:
Assemble And Disassemble The Plastic Bowl And Bowl Guard When It Is Confirmed That There Is Nol Load On The Object.
The Minimum Drop Flow Refers To The Drop Flow Of 5 Turbine Oil Every Minute On The basis Of The Pressure Set At 0.5mpa.
4.0/5
Rated by 16 Users