We are a prominent firm engaged in manufacturing, supplying and exporting High Performance Heavy Duty Actuator. These are procured from reliable vendors in the market and advanced technology by industry experts. We provide these to our respected clients in various dimensions and used in various industries. We supply our ranges of products to our clients at competitive prices in the market.
Product Details:
Brand | Rotex Automation |
Life Span | More Than 1 Million Cycles |
Nbr | 20 degree C To 80 degree C |
Viton | 25 degree C To 125 degree C |
Flouro Silicon | 40 degree C To110 degree C |
Hnbr | 40 degree C To 80 degree C |
DRV Pneumatic / hydraulic rack and pinion actuator ( female shaft )
Features :
Double Acting :
Unique Rack And Pinion Construction for Constant Torque Output.
Cylinder Bore Hard Chrome Plated, Pinion Electro Less Nickel Plated,
External surface Epoxy Painted For High Corrosion Resistance.
The Pinion Is supported On Ball Bearings.
Unique Rack Supporting System, Pre-Load On Pinion Can Be Adjusted.
Maximum Working Pressure 8 Bar.
Additional Lubrication Is not Necessary
Temperature Range
Nbr- 20 °C To 80 °C
Viton - 25 °C To 125 °C
Flouro Silicon- 40 °C To110 °C
Hnbr - 40 °C To80 °C
Life Tested To More Than 1 Million Cycles.
Easily Convertible From Single To Double Acting And Vice Versa.
Heavy Duty Piston Rod Bearing
Bronze Guide Bush Bearing
Life Time Lubricated By Special Grease
Pinion Bearings
Pinion Mounted On Rigid Ball Bearings
Very Low Friction Improves Stick Slip Resistance
Stem Of The Valve Is Protected With Side Thrust
Flexi Arm Connection
The Rack & Pinion Rod Are Connected Through The Flexible Coupling
No Slide Thrust Is Transferred To The Piston Rod.
Ensured Long Life Of Piston Rod Seals
Guided Spring Cartridge
Unique Spring Retaining System
Pre - Assembled Catridge
Spring Can Be Inspected Periodically Without Dismantling It From The Actuator
Spring Torque Can Be Easily Changed By Interchanging The Cartridge.
Iso Pad
Customer Interface As Per Iso 5211
An Optional Customized Solution Is Possible
One Piece Pinion Provides Playless Operation
Dual Key way Allows Easy Conversion From No To Nc And Vice Versa.
Zero Backlash Rack Guide
Rack Guiding System Installed With Ball Bearings
Eccentric Pin Provides Adjustment To Rack Backlash
Can Achieve Up To Zero Backlash
Long Life Adjustments Can Be Made
Spring Return :
Unique Spring Retaining System
The Spring Can Be Removed From The Actuator For Periodic Inspection
The Springs Are Epoxy Painted And Life Time Lubricated
Guaranteed To Operate More Than 1 Million Cycles
Standard Paint Finish
Rotex Provides, A High Quality Corrosion Protection System, On All Drv Actuators. The Actuators Are Painted Usin A Two Coat System, An Epoxy Base Primer Of 15- 20µthickness And Multiple Top Coat Of Ral5015 Of Total 60µ. The Paint Can Withstand 200 Hrs Of Salt Spray Test.
Optional 1000 Hrs Of Salt Spray Withstanding Paintings Can Be Provided.
Product Details:
Sport | Rotex Automation |
Rated Load | 100 lb |
Stroke Length | 2" |
Speed at Rated Load | 8.4 in/min |
Duty Cycle | 17% |
Pressure | 5 to 12 BAR |
torque transmission | 98 % |
Body | Aluminum Anodized |
Actuator | Single Acting/Double Acting |
Features of Scotchyoke Pneumatic & Hydraulic Actuator:
X seals and seal for low wear and tear, each with grease retaining groove
Extra heavy duty travel adjustment bolts can withstand high impact and are easy to adjust
Dual needle roller bearings provide for the most efficient torque transmission
The actuator can easily be converted to fail open from fail close, by interchanging the spring and pneumatic modules
The spring is well caged in the cartridge form
Solid bearing for piston rod for better alignment and smooth operation
Needle bearing, flexi joint, and the hardened yoke thrust pin bearing, are all incorporated into the actuator for longer, smoother operation. The rotex drs actuator gives you greater efficiency and higher torque output, with less maintenance
Piston seal and guide
The piston is guided by ptfe thrust bearing, to ensure no ifp metal to metal contact
The seal is x shape with flexibility , to minimize the friction
Guaranteed operation of 1 million cycles
Yoke pin thrust bearing
The carrier is well guided on the support rod
Case hardened steel of the yoke thrust pin is strong for consistent transmission of the force
Flexi joint
The thrust transmitted through the flexi joint ensures no side thrust on the cylinder walls and the bearings.
In spring return actuators, dual flexi joints allow the carrier to operate perfectly and smoothly.
Heavy duty bearing
The piston rod is guided on the heavy duty bearing
V - seal at the rod end ensures a very long life
The bearing is built with a high grade bronze metal
Dual yoke bearings
The yoke is supported on life time lubricated ball bearings
Very low co- efficient of friction
Provides 98 % of the torque transmission
X seal on tie rod
The x seal provides the flexibility in sealing
The x seal provides extremely low friction and a long life
Additional Information:
Product Details:
Structure | Ball |
Brand | Rotex Automation |
Rated Load | 100 lb |
Stroke Length | 2" |
Speed at Rated Load | 8.4 in/min |
Duty Cycle | 17% |
Retracted Length | 16-3/4" |
Voltage | 115 V AC |
Maximum Working Pressure | 10 bar |
Temperature Range | 20 degree C To 80 degree C |
DRC Pneumatic / hydraulic rack and pinion actuator(male shaft)
Features :
Double Acting
Rack & Pinion Construction
High Corrosion Resistance
Pinion Is Supported On Ball Bearings
Unique Rack Support System To Ease Large Torque Transmission
Maximum Working Pressure 10 Bar
Lubrication Not Necessary
Temperature Range Nbr- 20 °C To 80 °C
Viton - 25 °C To 125 °C
Tested To More Than 1 Million Cycles
Can Be Converted To Single Acting By Just Adding Spring Module Kit
End Stroke 0° And 90°
A Setting Screw Are Provided On Covers
Set The Closing Position Against The Piston
The Spring Can Be Assembled Or Removed Easily
-10 ° Setting Possible For Closing
Set The Opening Position Against The Piston Or Spring Retainer
+ 10 °setting Possible For Opening
Iso Pad
Valve Mounting Is As Per The ISO 5211, With An Additional One Size Higher Pad.
Standardization In Mounting Accessories
An ISO Ring For Precise Location
Optional Female Octagonal Drive Shaft
Shaft
Male Double Dd
Male Key Way
Female With Key Way
Spring
Gr.Iii Spring Steel, Epoxy Coated For High Corrosion Resistance
Springs To Suit Various Valve Torque Characteristics
Cartridge is Life Time Lubricated
Non Buckling Spring Design
Precompression Leads To A Longer Spring Life.
Spring Return
Unique Spring Retainer Construction
Ease Of Handling And Greater Safety While Dismantling
Eliminates Need Of Special Tools And Keys
The Spring Life Time Lubricated
Pre compression Leads To Longer Spring Life
Spring Can Be Assembled Or Removed Easily
Tested To More Than 1 Million Cycles
Standard Pant Finish
Rotex Provides, A High Quality Corrosion Protection System, On All Drc Actuators. The Actuators Are Painted Using A Two Coat System, An Epoxy Base Primer Of 15 -20 Μ Thickness And Multiple Top Coat Of Ral5015 Of Total 60 Μ. The Paint Can Withstand 200 Hrs Of Salt Spray Test
Optional 1000 Hrs Of Salt Spray Withstanding Paintings Can Be Provided
Additional Information:
Product Details:
Roller Length | Rotex Automation |
Rated Load | 100 lb |
Stroke Length | 2" |
Voltage | 115 V AC |
Temperature Range | 40 C To + 85 C |
Maximum Pressure | 450 Bar |
Over Travel | 7 degree For Opening And Closing |
Under Travel | 5 degree On Both Side |
Features :
Heavy Duty , Steel Body
Rack & Pinion Construction
Zero Leak System Using Unique Sealing System
Extremely Rugged Actuator
Excellent For Cyclic Loads
Alternatively, Pneumatic Cylinder Can Be Attached
A Single Spring Is Retained In The ` Safe Guard `
Easily Convertible To Cw From CCW
Unique Spring Retaining System
An Inbuit Bracket For Mounting Accessories
Maximum Pressure 450 Bar
Temperature Range - 40 °C To + 85 °C
All Wear Parts Are Lifetime Lubricated
Pinion On Low Friction ball Bearing
Top Switch Shaft As Per ISO 5211
Over Travel 7° For Opening And Closing
Under Travel 5° On Both Side
Additional Information:
Product Details:
Actuator Type | Hydraulic Actuator |
Brand | Rotex |
Structure | Control |
Voltage | 230 V AC |
Stroke Length | 1" |
Speed at Rated Load | 8.4 in/min |
Rated Load | 100 lb |
We have gained vast expertise in offering Hydraulic Override in a wide range of our clients, which can be obtained from us at market leading prices. These are fabricated by usage of best quality material that is procured from reliable vendors in the market. We offer these products based on the specifications of our clients.
Product Details:
Minimum Order Quantity | 500 Piece |
Type | Wired |
Brand | Rotex Automation |
Operating Pressure | 4 - 10 bar |
Ambient temp | -5 C to +50 C |
Rated Voltage | 24VDC |
Drive Force | 2000n (0.4 Mpa) |
Endurance | 500,000 cycles |
Additional Information:
4.0/5
Rated by 16 Users