Features:

• Bubble tight shut off.
• Mounts in any position.
• Vibration resistance to 9g.
• Suitable for high speed cycling.
• Speed up to 1200 cycles/ min.
• Life >20 million cycles.

Model:

Specifications:

Angle Seat Valve Salient Features of Angle Seat Valve:

• Normally Closed/ Normally Open/ Bi-Directional.
• Can Be Easily Converted From Nc To No and Single Acting To Double Acting.
• Life > 10 Million Cycles..
• Wetted Parts : Cf3m (SS 316l Cast), Ss 316l.
• Fast Acting Up To 2000 Cycles / Hour.
• Piston Shaft Well Supported By Rigid Non Metallic Linear bearings Avoiding Metal to metal Contact.
• Specially Designed Body With Lower Bends For Higher Flow.
• Burnished Piston Shaft.
• Ideally Suited For Vacuum Service.
• Modular Design.

Applications:

• Air Drying Equipment, Autoclave, Bottling & Dispensing Equipment, Chemical & Petrochemical Industries, Coolant Control For Machine Tool, Fuel, Ink & Paint Dispensing, Industrial Compressor, Laundry Equipment,Nuclear Energy, Pollution Control Equipment, Process Control Application, Power Generation, Paper & Pulp Industries, Psa Plants, Pharmaceutical, Steam, Sterilizer, Textile Dyeing & Drying.

• Pilot Pressure: 0.8 - 10 bar
• Ambient Temperature: -10 deg C to 60 deg C
• Fluid Temperature:- 10 deg C to 180 deg C
• Operating Pressure: 0 - 16 bar, 0 - 25 bar

Angle Seat Valve Salient Features of Angle Seat Valve:

• Normally Closed/ Normally Open/ Bi-Directional.
• Can Be Easily Converted From Nc To No and Single Acting To Double Acting.
• Life > 10 Million Cycles..
• Wetted Parts : Cf3m (SS 316l Cast), Ss 316l.
• Fast Acting Up To 2000 Cycles / Hour.
• Piston Shaft Well Supported By Rigid Non Metallic Linear bearings Avoiding Metal to metal Contact.
• Specially Designed Body With Lower Bends For Higher Flow.
• Burnished Piston Shaft.
• Ideally Suited For Vacuum Service.
• Modular Design.

Applications:

• Air Drying Equipment, Autoclave, Bottling & Dispensing Equipment, Chemical & Petrochemical Industries, Coolant Control For Machine Tool, Fuel, Ink & Paint Dispensing, Industrial Compressor, Laundry Equipment,Nuclear Energy, Pollution Control Equipment, Process Control Application, Power Generation, Paper & Pulp Industries, Psa Plants, Pharmaceutical, Steam, Sterilizer, Textile Dyeing & Drying.

• Pilot Pressure: 0.8 - 10 bar
• Ambient Temperature: -10 deg C to 60 deg C
• Fluid Temperature:- 10 deg C to 180 deg C
• Operating Pressure: 0 - 16 bar, 0 - 25 bar

Square DIN plug can be fitted at 90° at any of three cable entry position


Application:

• Drain, Air Drier, Dosing

Timer Specification:

• ON Time : 1.5 sec to 30 sec
• OFF Time : 0.5 min to 45 min
• 0 - 10 bar and 0 - 15 bar